Sciologness The most complete collection of drivers for your computer! |
- Cts Electronics Ls 100 Usb Driver Adapter
- Cts Electronics Ls 100 Usb Drivers
- Cts Electronics Ls 100 Usb Driver Download
Cts Electronics Ls 100 Usb Driver Adapter
EL6 A USB 2.0 HS driver must have 10% to 90% differential rise and fall times of greater than 300 ps as per compliance update #87. Reference documents: USB 2.0 Specification, Section 7.1.2.2 Test description: Section 4.1.1 EL7 A USB 2.0 HS driver must have monotonic data transitions over the vertical openings. Compact Quiet Powerful LS 100 The smallest, fully-featured scanner for teller and remote deposit capture applications — lightweight and packed with features you won’t find anywhere else in its class. Whether you require a throughput of 50 up to 200 DPM, the LS Series of scanners is your best choice. Each scanner features CTS’s own common API, USB2 interface, and support of TWAIN and Silver Bullet Ranger interfaces. OCR & barcode data recognition, image compression and IQA and electronic endorsement are all standard features with ARCA. USB: USB 2.0 and optional onboard USB hub with 1 additional host port: Ethernet: Ethernet connectivity 10/100Base-T and WIFI by LsConnect device: Drivers: LS Common API/DLL for Windows (32/64 bit), Linux and Mac OSX. Ranger and TWAIN interface driver available: Applications: Exerciser and diagnostic application: Basic Unit Features.
Drivers Catalog ⇒ USB Devices ⇒ CTS ⇒ CTS Electronics LS150 USB Drivers Installer for CTS Electronics LS150 USBIf you don’t want to waste time on hunting after the needed driver for your PC, feel free to use a dedicated self-acting installer. It will select only qualified and updated drivers for all hardware parts all alone. To download SCI Drivers Installer, follow this link.
CTS Electronics LS150 USB: Drivers List1 drivers are found for ‘CTS Electronics LS150 USB’. To download the needed driver, select it from the list below and click at ‘Download’ button. Please, ensure that the driver version totally corresponds to your OS requirements in order to provide for its operational accuracy. |
|
Cts Electronics Ls 100 Usb Drivers
- Buy Now
- Seeed
- FabToLab (India)
- Features
- Attaches to 96Boards low-speed (LS) expansion connector
- FT230X USB to UART adapter chip
- USB bus powered. Doesn’t disconnect when base board power is cycled
- Switchable between LS UART0 and UART1. (UART1 is the default console)
- CTS/RTS with using UART0
- TX and RX LEDs
- Remote control of baseboard reset and power signals
- Base board reset button
- TX and RX LEDs
- User LED connected to GPIOB (GPIOA on v1.0 of the adapter)
- Product Includes
- 1 x 96Boards UART (96B-05UART-V1.1)
- 2 x 2mm shunts
- More Info
Available now from Seeed: This adapter is a USB to UART interface to be used with any base board compatible with the 96Boards Consumer Edition or Enterprise Edition specifications.
It makes it easy to connect your PC to the serial console on the 96Boards low-speed expansion connector, without worrying about pinout or level shifting for 1.8V IO. It also provides remote control of the power button and reset signals so that the base board can be completely controlled over a single USB cable.
Since it uses the FT230X chip from FTDI, when it is connected to your PC over USB, it appears as a normal UART interface on a PC, Macintosh or Linux computer with an FTDI UART driver installed.
Buy Now
Additional Resources
Additional Information
Component | Description |
---|---|
2 x 20 2.0mm pitch male header | Attaches to 96Boards low-speed (LS) expansion connector |
FT230X USB to UART adapter chip | |
USB bus powered. Doesn’t disconnect when base board power is cycled | |
Switchable between LS UART0 and UART1. (UART1 is the default console) | |
CTS/RTS with using UART0 | |
TX and RX LEDs | |
Remote control of baseboard reset and power signals | |
Base board reset button | |
TX and RX LEDs | |
User LED connected to GPIOB (GPIOA on v1.0 of the adapter) |
Parts list
Cts Electronics Ls 100 Usb Driver Download
- 96Boards UART (part # 96B-05UART-V1.1)
- 2 x 2.0mm shunts